Maintenance of electric hospital beds
Because the Electric Medical Bed has a lot of use functions that are not available in ordinary beds, it is more and more popular with the medical industry. At the same time, it is also because of the existence of these special functions that it has a large difference in use from the ordinary bed Methods should pay more attention to standardization and safety operations when using, and pay attention to maintenance and maintenance when not in use.
1. When not in use, the Electric Hospital Bed is at the lowest position. After the power cord controller line is wrapped, push it to the safe place to stop the thousand -way wheels. 2. Check regularly, check whether the controller line and linear drive wires, insertion are firm and reliable, and whether the connection bolts are loose. 3. Wash regularly, use neutral detergent to clean, and wipe with a soft dry cloth after cleaning. As for the ventilation, 4. Do not use alkaline or other corrosive liquids. 5. In the process of handling and use, collision is strictly prohibited to prevent damage to structural components. 6. Do not contact strong acids and strong alkali to prevent corrosion. If you are not caused by strong acid, strong alkali or adhesive, you can not remove the discoloration in time to produce sewage. You can rinse or soak it with water Wipe the synthetic detergent with a wet cloth, and then wipe it in a dry cloth. 7. If you need to repair or replace the parts of the Nursing Bed, please contact our company after -sales service department, please do not disassemble yourself. 
